pinout for mininail coil

/
/
/
150 Views

Controller for 12V Hot Runner Coil Heater, 2nd Generation

pinout for mininail coil

Product Description:

Controller for Hot Runner Coil Heater, E-Nail 12V DC Powered
This is a 12VDC powered PID controller for a hot runner coil heater. Compared to an AC powered controller, it offers more flexibility to its user in terms of its power connection. It can get power directly from 12VDC battery pack or from a power adapter that converts main power to 12VDC. It is compact in size and light in weight.

Recommended batteries including the lithium iron phosphate (LiFePO4) battery and sealed lead acid (SLA) battery. The heater will draw about 5 amps when heating up. It will drop to 2 – 3 amps once the temperature is stabilized. A 10Ah rated battery will give 3 – 4 hours of continuous operation*.

The optional AC to DC adapter can convert 100 – 240VAC to 12VDC, maximum current is 8 amps. It carries both CE and UL approval.

Please note that this controller will not work with regular heating coils made for 120VAC. It only works with coil heaters that are designed for 12VDC. The acceptable coil heater should be less than 90 watts in its power rating. (Please contact us if you need to use a more powerful heater.) If you are not using the coil heater provided by Auber, you need to make sure the pin assignment of the heater matches with the controller. Using a coil heater with a wrong pin assignment could damage both the coil and controller.

The optional flat coil is rated for 70 Watt 12V.  This coil is compatible with our universal nail.

The universal nail is made of grade 2 titanium. It consists of 5 pieces, which can be configured into male nail or female nail. In either configuration, it can fit 14 or 18mm glass.

Specifications:
Controller:
Operating voltage: 12VDC
Maximum: 8 Amp
Input power connection: Barrel Connector 5.5 mm OD, 2.1 mm Pin. Center Positive
Coil connection: XLR 5 Pin
Dimension: 4.3 x 3.6 x 1.4 inch, (110 x 91 x 36 mm)
DC Flat Coil:
Power rating: 70W at 12VDC
Dimension: 10mm ID, 28mm OD.
Cable length 55 in
Temperature range: 200 to 1000°F.
Universal Nail:
Can be use in either male or female configuration.
Grade 2 titanium
Male: fits 14mm & 18mm female glass.
Warranty: One (1) year for the controller; six (6) months for the coil heater**.
  • Facebook
  • Twitter
  • Google+
  • Linkedin
  • Pinterest

Leave a Comment

Your email address will not be published. Required fields are marked *